SAKER
Mini Chainsaw SK1806D-O for Branches
Clear storm limbs and overgrown fence lines with a compact cordless saw that fits in one hand and stores neat in its case.
$74.994.5 out of 5 4,858 ratings
Find your tool
Two questions. The first is where you are standing, the second is what is in front of you. The answer is a shelf and four pieces off it.
Where are you standing?
What is in front of you?
Mini chainsaws and saws
Short bar saws and hand saws carry this. They start on a battery, weigh what one arm can hold overhead and cut green wood up to a few inches through.
Mini Chainsaw with Two Batteries
A small cordless saw for fence rows, fallen limbs, and the dead wood you can reach without climbing a ladder.
$89.99
Mini Chainsaw 6-Inch, 2026 Build, Full Kit
A cordless pruning saw packed with the full spread of accessories for clearing storm brush, fallen limbs, and overgrown fence lines around the yard.
$79.89
Mini Chainsaw 6-Inch with Safety Lock
A handheld cordless chain saw built with a copper motor to clear fallen limbs and prune fence rows without cords trailing behind.
$74.99
Yard and garden
This shelf is the ground work. Augers, weeders, shears and the hand tools that go in the bucket with them.
22V Cordless Garden Tiller
A cordless garden cultivator with two batteries and steel tines to break hard crust, turn compost, and churn tight planting rows without an extension cord.
$89.99
Cordless Weed Wacker with Auto Line Feed
The string trimmer with an automatic feed head, two batteries, and a quick turn into an edger for fence lines and walkway borders.
$79.99
Submersible Sump Pump, 1/4 HP
Drop the pump into standing pool cover water or a flooded well and let the automatic switch start drainage as the water rises.
$79.99
Garden Kneeler and Seat with Extendable Legs
A folding aluminum frame with dual-layer pad and extendable legs that flips from a low kneeling bench to a garden stool.
$66.99
Lights, storage and home
The lights and storage shelf reaches outdoors too. Sprayers, lamps and holders that live on the fence and the shed wall.
Work Light with Remote, 20000mAh
Set this tripod light in the dark corner of the yard or under the hood, adjust three folding panels, and run the beam with the small remote.
$89.99
Solar House Number 0, Nine-Inch
A tall illuminated address digit with an integrated solar panel that charges by day and throws a warm backlight across the siding after dark.
$22.99
What is in front of you?
Car care and detailing
Car care and detailing. Foam cannons, brushes, vacuums and the small stuff that gets into seat seams and vents.
Cordless Electric Grease Gun, 10000 PSI
A cordless grease gun that runs on battery power, built with a flexible hose and an integrated light to reach grease fittings without pumping by hand.
$79.99
Cordless Buffer Polisher, Six-Inch with Two Batteries
A cordless orbital buffer with two batteries and a six-inch pad tray that works across fenders without catching an extension cord on the tires.
$76.49
Foam Cannon with Dual Connector
Two outlets on one brass body let you soak the truck in soap then flip straight to clear rinse water without swapping wands.
$69.99
Handheld Steam Cleaner, 1050W
Hot pressurized steam loosens dried floor mat grime, greasy door jambs, and kitchen tile without added solvents or sprays.
$65.99
Welding and torches
Welding and torches. Stick welders, torch heads and soldering irons, sized for a single bay rather than a shop floor.
Portable 110V ARC Welder, 5-Level IGBT
A handheld stick welder that fits in one hand, runs small rods on thin iron and gate frames, and plugs straight into the wall out in the shop.
$129.99
Propane Torch for Grill and Campfire
This handheld torch threads onto standard fuel bottles to light lump charcoal, start campfires, and preheat steel right on the bench.
$45.99
E6013 Welding Rods, 3/32-Inch, 5 lb
These general mild steel electrodes strike easily on smaller home welders and leave a smooth bead across awkward joints.
$29.99
Lights, storage and home
Lights, storage and home. The pieces that make the space work rather than the ones that do the job.
What is in front of you?
Mini chainsaws and saws
Short bar saws and hand saws. Battery powered, one handed, and quiet enough to use with the back door open.
Mini Chainsaw SK1806D-O for Branches
Clear storm limbs and overgrown fence lines with a compact cordless saw that fits in one hand and stores neat in its case.
$74.994.5 out of 5 4,858 ratings
Mini Chainsaw with Two Batteries
A small cordless saw for fence rows, fallen limbs, and the dead wood you can reach without climbing a ladder.
$89.99
Mini Chainsaw 6-Inch, 2026 Build, Full Kit
A cordless pruning saw packed with the full spread of accessories for clearing storm brush, fallen limbs, and overgrown fence lines around the yard.
$79.89
Mini Chainsaw with Auto Oiler and Three Chains
The small cordless saw drops downed limbs into the wheelbarrow, oils the bar as you cut, and packs three chains in the case.
$74.99
Drivers, jigs and install kits
Drivers, jigs and install kits. Templates that put holes where they belong and drivers short enough to reach inside a cabinet.
Six-Piece Hammer Set
Six distinct striking tools cover everything from framing a shed corner to seating soft pine joints without leaving a dent.
$49.99
65-Piece Laminate Flooring Installation Kit
The mallet, pull bar, handled block, spacers and locking gauge you need to lay laminate plank tight to the wall.
$42.29
Cordless Tile Vibration Tool
A cordless tiler tool with suction grip and adjustable vibration speed to seat large floor or wall tile flat in the mortar bed.
$37.37
66-in-1 Magnetic Ratcheting Screwdriver Set
A pocketable case of machined steel bits paired with a ratcheting driver handle that converts to a T grip when stubborn fasteners refuse to turn.
$34.99
Measuring and marking
Measuring and marking. Contour gauges, levels, finders and the tools that answer the question before the saw does.
Contour Gauge Connection Package
Press the teeth against baseboard, pipes, or casing, lock the spine, and carry the outline directly to your board.
$89.99
Contour Gauge Pair, 10-Inch and 5-Inch
Two gauges in two lengths to press against baseboard trim, copper supply lines, or wheel arches and transfer the line to your stock.
$39.99
Foldable Level, 28-Inch Multi-Angle
A hinged aluminum level that bends around posts, corners, and pipes, then folds into a tight block for the toolbox tray.
$31.99
4-in-1 Drilling Positioning Ruler
Line up repeated drill holes and check level on cabinet faces without measuring each bore by hand from scratch.
$26.99
Lights, storage and home
Lights, storage and home. The shelf that covers the jobs nobody plans for.
Travel Vacuum Bags, 20-Piece Combo
These compression bags pack down bulky sweaters and spare bedding to make room in luggage or on a high closet shelf.
$45.99
Vacuum Storage Bags with Pump, 20 Pack
A stack of compression bags with a dedicated electric pump to pull down bulky blankets, coats, and spare bedding for the top shelf.
$35.99
Solar House Number 0, Nine-Inch
A tall illuminated address digit with an integrated solar panel that charges by day and throws a warm backlight across the siding after dark.
$22.99
What is in front of you?
Measuring and marking
Measuring and marking. This is the biggest shelf at the bench, because most of the time spent there is spent deciding where the line goes.
Contour Gauge Connection Package
Press the teeth against baseboard, pipes, or casing, lock the spine, and carry the outline directly to your board.
$89.99
4-in-1 Scriber, 29.5-Inch Spliceable T-Square
An aluminum marking scriber with extension sections and angle stops for laying out cabinet pulls, edge offsets, and long angled board lines.
$39.99
Contour Gauge Pair, 10-Inch and 5-Inch
Two gauges in two lengths to press against baseboard trim, copper supply lines, or wheel arches and transfer the line to your stock.
$39.99
Aluminium Scribing Tool
Mark uneven walls, scribe parallel lines, and trace tight arcs using an aluminum body that clips straight to your belt or pocket.
$35.99
Drivers, jigs and install kits
Drivers, jigs and install kits. Bit sets, doweling jigs and the clamping bits that make a second pair of hands unnecessary.
38-Piece Magnetic Nut Driver Set
A full tray of chrome-vanadium magnetic sockets, deep wells, and adapters built to grab fast and stay locked on the bolt head.
$56.99
Six-Piece Hammer Set
Six distinct striking tools cover everything from framing a shed corner to seating soft pine joints without leaving a dent.
$49.99
66-in-1 Magnetic Ratcheting Screwdriver Set
A pocketable case of machined steel bits paired with a ratcheting driver handle that converts to a T grip when stubborn fasteners refuse to turn.
$34.99
4-in-1 Router Milling Jig with Punch Guide
Circles and straight mortises need clean pivots, so we built this aluminum base to guide your palm router through sheet goods and hardwood boards.
$29.99
Welding and torches
Welding and torches. Bench sized machines and torch heads that run off a camping cylinder.
Portable 110V ARC Welder, 5-Level IGBT
A handheld stick welder that fits in one hand, runs small rods on thin iron and gate frames, and plugs straight into the wall out in the shop.
$129.99
E6013 Welding Rods, 3/32-Inch, 5 lb
These general mild steel electrodes strike easily on smaller home welders and leave a smooth bead across awkward joints.
$29.99
Mini chainsaws and saws
Short bar saws and hand saws. Useful at the bench for the awkward cut that a fixed machine cannot reach.
Mini Table Saw with 160+ Accessories
Small desktop saw built for trimming model stock, thin boards, copper pipe, and plastic without setting up a full bench saw.
$89.99
Mini Chainsaw 6-Inch with Safety Lock
A handheld cordless chain saw built with a copper motor to clear fallen limbs and prune fence rows without cords trailing behind.
$74.99
Electric Chainsaw Sharpener Kit
A cordless grinder with preset angle guides to dress dull chain teeth right on the bar without dragging an extension cord across the yard.
$49.99
Or take the shelves as they come
The finder is a shortcut, not a gate. Every shelf and every part of the property is one click away below.