Skip to the gear
Drivers, jigs and install kits

Chisel Sharpening Jig with Diamond Stone

Most chisels lose their edge because hands rock as they travel down a whetstone. We built this jig with a wide roller beneath the frame so the tool stays flat on the surface. Set the blade projection to match the bevel you want, tighten the metal clamp, and run the pass across the stone.

$29.964.4 out of 5 817 ratings

Price and stock live with the storefront and can move between visits.

Chisel Sharpening Jig with Diamond Stone

What this one is built to do

Wide roller base

The broad roller underneath keeps the assembly steady as you push down the plate. Narrow wheels tend to tip when you lean into a stroke, but this wide base holds your bevel flat against the diamond grit.

Solid metal clamp

A metal stud locks your tool between aluminum jaws that will not rust when wet. It grips narrow carving chisels and broad hand planer irons without slipping loose mid stroke.

Repeatable bevel angles

Change the sharpening angle by sliding the tool further out or closer to the clamp before locking the knob. The offset roller position leaves room for short blades that struggle in older guides.

Bench stone ready

Water or honing oil comes from your own shelf, because the stone runs dry in the box. Keep the plate on a level spot on the bench and work through your dull irons one by one.

The spec line

Tool shelfDrivers, jigs and install kits
Where it worksAt the workbench

Payment, delivery and returns run at the storefront, under its own rules.

Chisel Sharpening Jig with Diamond Stone

Set the bevel once and roll across the stone without the wobble that rounds off cutting edges.

$29.964.4 out of 5 817 ratings