
38-Piece Magnetic Nut Driver Set
A full tray of chrome-vanadium magnetic sockets, deep wells, and adapters built to grab fast and stay locked on the bolt head.
Laying down click flooring always comes down to the same awkward edges. You need a block that takes a hit, a bar that fits behind the baseboard, and spacers that stay upright against the drywall. We pack the core hardware together so you can start the first row.
Price and stock live with our retail partner and can move between visits.

The thick plastic block has a molded top handle. Your fingers stay off the strike face while you seat the tongues together. It takes direct mallet strikes without chipping the fragile edges off your new planks.
When you reach the last row against the baseboard, there is no room to swing a block. The steel bar drops down behind the plank edge. A soft backing rests against the surface while you tap the upright flange.
Thin plastic wedges tend to tip over the second you bump a board into place. These triangle blocks stay upright along the drywall. They set the gap you need around the room perimeter before you trim out the base.
Pipes and door jambs force irregular cuts on the ends of your planks. The row of pins slides against the profile, then locks in place with a flip latch. You trace the shape directly onto your board before cutting.
| Tool shelf | Drivers, jigs and install kits |
|---|---|
| Where it works | Around the house |
| Pieces | 65 |
The storefront belongs to our retail partner. Payment, delivery and returns run on their side, under their rules.

A full tray of chrome-vanadium magnetic sockets, deep wells, and adapters built to grab fast and stay locked on the bolt head.

Six distinct striking tools cover everything from framing a shed corner to seating soft pine joints without leaving a dent.

A cordless tiler tool with suction grip and adjustable vibration speed to seat large floor or wall tile flat in the mortar bed.

A pocketable case of machined steel bits paired with a ratcheting driver handle that converts to a T grip when stubborn fasteners refuse to turn.
The mallet, pull bar, handled block, spacers and locking gauge you need to lay laminate plank tight to the wall.