SAKER
38-Piece Magnetic Nut Driver Set
A full tray of chrome-vanadium magnetic sockets, deep wells, and adapters built to grab fast and stay locked on the bolt head.
$56.99
Cabinet Hardware Doweling Jig, 5-Inch
Setting cabinet pulls by hand means measuring the same offset on every drawer front until one slips. We mill this template from aluminum alloy so the guides lock tight and stay square against the wood. Set your spacing once, tighten the thumb nuts, and run your drill bit through the hardened bushings.
$29.99
Price and stock live with our retail partner and can move between visits.
2 versions of this bodySame tool, different kit or size. The spec line on each page carries what changed.
What this one is built to do
Milled aluminum frame
We build the frame from aluminum alloy so it will not warp in a damp shop or rust when left on a basement shelf. The metal body holds its edge flat against cabinet rails and drawer faces without flexing.
Adjustable hole spacing
The guide blocks slide along the rail to match common drawer pulls and door handles. Tighten the center nut to fix the spread and hold your hole spacing steady from the first door to the last.
Repeatable edge offset
The top fence sets your distance from the door margin. Slide the fence into place, lock it down, and press the stop against the corner of each drawer front to drill matching hole locations without marking wood.
Folds flat for storage
Loosen the center nut to fold the frame flat when the cabinets are done. It tucks into a tool bag or lays across the drawer next to your drill bits, ready for the next set of pulls.
The spec line
| Tool shelf | Drivers, jigs and install kits |
|---|---|
| Where it works | At the workbench, Around the house |
| Size | 5 in |
The storefront belongs to our retail partner. Payment, delivery and returns run on their side, under their rules.
Others on the drivers, jigs and install kits shelf
Six-Piece Hammer Set
Six distinct striking tools cover everything from framing a shed corner to seating soft pine joints without leaving a dent.
$49.99
65-Piece Laminate Flooring Installation Kit
The mallet, pull bar, handled block, spacers and locking gauge you need to lay laminate plank tight to the wall.
$42.29
Cordless Tile Vibration Tool
A cordless tiler tool with suction grip and adjustable vibration speed to seat large floor or wall tile flat in the mortar bed.
$37.37
Cabinet Hardware Doweling Jig, 5-Inch
Aluminum hardware jig sets your drill holes at matched spacing across cabinet faces so handles and pulls line up straight across the room.
$29.99