
Camping Light LD10 with Stand, 12000mAh
Telescoping tripod light with three folding panels, a magnetic base, and enough battery to run through the evening or charge a phone.
Chainsaws end up on the floor under the bench or balanced on a milk crate where they catch every boot that walks past. We bend these from plain steel and dip the arms in thick orange rubber. Three screws hold the plate to the stud, and the saw hangs clear of the concrete.
Price and stock live with the storefront and can move between visits.

The bracket starts as thick steel plate cut to carry the weight of a fueled saw. An orange rubber dip covers the contact points so bare metal does not rub against your rear handle.
Set the hooks to hold the saw flat against the wall or turned sideways along the bar. The arms adjust to match the grip on your gas saw or battery saw without prying at the plastic.
The second set of arms holds your scrench right next to the powerhead. You do not have to hunt through a coffee can on the bench when the chain needs a quick turn of tension.
Three heavy wood screws ship in the pack to seat the plate into a wall stud. Drywall anchors come out of your own drawer if you are hanging it over masonry or bare block.
| Tool shelf | Lights, storage and home |
|---|---|
| Where it works | In the garage, Around the house |
Payment, delivery and returns run at the storefront, under its own rules.

Telescoping tripod light with three folding panels, a magnetic base, and enough battery to run through the evening or charge a phone.

A thin faceplate that snaps over a duplex outlet and runs power down a low line so dressers and desks sit flush to the wall.

Flattens spare bedding, winter coats and shop blankets down into tidy packs with a small cordless air pump.

A tall illuminated digit that gathers daylight through a coated panel and casts a steady backlight across your siding once evening settles in.
A dipped steel bracket that takes the saw off the floor and holds the wrench beside it on the shop wall.