SAKER
Portable 110V ARC Welder, 5-Level IGBT
A handheld stick welder that fits in one hand, runs small rods on thin iron and gate frames, and plugs straight into the wall out in the shop.
$129.99
E6013 Welding Rods, 3/32-Inch, 5 lb
Thin metal and worn yard gates rarely fit together flush. We pack these mild steel rods for the repairs where you need a quick arc strike, quiet spatter, and slag that lifts cleanly off the bead. They run on both alternating and direct current bench machines without fuss.
$29.99
Price and stock live with our retail partner and can move between visits.
2 versions of this bodySame tool, different kit or size. The spec line on each page carries what changed.
What this one is built to do
Striking the puddle
The flux coating catches fast without sticking hard to cold plate. That smooth start helps when you are tacking light sheet or working with a modest bench box.
Gaps and thin metal
Shallow penetration keeps you from blowing through thinner stock. The puddle bridges loose fits along rusted brackets or cut pipe without demanding tight joint work first.
Any position run
Flat on the bench or vertical along a post, the bead stays put. Moving vertical down leaves a fine ripple pattern and keeps heat from building up too fast.
Chipping the slag
The glassy crust cools quickly and peels back with a light tap of the hammer. Less time grinding means you get right to the next seam on the frame.
The spec line
| Tool shelf | Welding and torches |
|---|---|
| Where it works | In the garage, At the workbench |
The storefront belongs to our retail partner. Payment, delivery and returns run on their side, under their rules.
E6013 Welding Rods, 3/32-Inch, 5 lb
These general mild steel electrodes strike easily on smaller home welders and leave a smooth bead across awkward joints.
$29.99