
Contour Gauge Connection Package
Press the teeth against baseboard, pipes, or casing, lock the spine, and carry the outline directly to your board.
Cabinet pulls and wide panel cuts go wrong when your ruler runs out halfway across the board. We made this aluminum scriber to clamp together into a long run, hold fixed angles, and mark drill points along two axes at once. The pencil and drill bits come from your bench.
Price and stock live with our retail partner and can move between visits.

The sections lock together when you need to run a line across wide stock without picking the ruler up. You can separate the pieces when working inside a narrow drawer face.
The adjustment knob locks into common bevel angles so you can scribe radial marks and angled cuts across the workpiece without bringing a separate protractor to the bench.
Positioning blocks slide along the arms so you can mark handle spacing from two edges at the same time. The stops stay put while you move from door to door.
The body is anodized aluminum alloy that stays straight across the board. Laser etched hash marks will not rub off after seasons of riding in a tool tote.
| Tool shelf | Measuring and marking |
|---|---|
| Where it works | At the workbench |
| Size | 4 in |
| Functions | 4-in-1 |
The storefront belongs to our retail partner. Payment, delivery and returns run on their side, under their rules.

Press the teeth against baseboard, pipes, or casing, lock the spine, and carry the outline directly to your board.

Two gauges in two lengths to press against baseboard trim, copper supply lines, or wheel arches and transfer the line to your stock.

Mark uneven walls, scribe parallel lines, and trace tight arcs using an aluminum body that clips straight to your belt or pocket.

A hinged aluminum level that bends around posts, corners, and pipes, then folds into a tight block for the toolbox tray.
An aluminum marking scriber with extension sections and angle stops for laying out cabinet pulls, edge offsets, and long angled board lines.