
Contour Gauge 10-Inch with Lock
A row of flat plastic teeth that presses against door casings, pipe curves, and uneven baseboards to lock the profile for a pencil trace.
Setting tile or hanging upper cabinets alone usually means snapping chalk lines that smudge or holding a long box level with your chin. We pack this self-leveling green line tool with its own stand and hardware so you can throw clean reference planes across every wall at once. Turn it on, let the pendulum settle, and start marking.
Price and stock live with the storefront and can move between visits.

Four separate planes throw crisp green beams across the floor, walls, and ceiling simultaneously. The green light shows up sharper against drywall and studs than old red diodes, giving you clear marks for tile runs and dropped ceilings.
Unlock the pendulum and the system levels itself within a few seconds. If the floor slope or tripod leg sits too far out of range, the tool beeps and flashes the lines until you crank the base back toward flat.
The kit includes a collapsible metal tripod along with a fine-adjustment base, a lifting platform for baseboards, and a magnetic wall bracket. You can set the beam tight to the slab or raise it high for shelf standards.
Two rechargeable battery packs ride in the hard plastic case alongside the charger and small remote control. While one pack runs the leveling head on the tripod, the second stays on your bench charging for the afternoon.
| Tool shelf | Measuring and marking |
|---|---|
| Where it works | At the workbench, Around the house |
| Batteries | 2 |
Payment, delivery and returns run at the storefront, under its own rules.

A row of flat plastic teeth that presses against door casings, pipe curves, and uneven baseboards to lock the profile for a pencil trace.

Two gauges in two lengths to press against baseboard trim, copper supply lines, or wheel arches and transfer the line to your stock.

An aluminum dial that takes the guesswork out of trim cuts by reading corner angles and showing the exact miter saw setting.

An aluminum rule and protractor head that locks down with a thumb nut for laying out lines, finding angles, and setting saw bevels across the bench.
Bright green cross lines cover the entire room while the internal pendulum finds plumb and true level across bare subfloors.