Skip to the gear
Drivers, jigs and install kits

Hydraulic Copper and PEX Crimping Kit

Fittings tucked behind a vanity or between floor joists leave little room for long manual levers. We built this hydraulic press with a swiveling slim head to seat rings squarely in tight corners. The kit packs swappable dies for copper and plastic pipe, with the cutter and deburring tool in the case.

$149.994.4 out of 5 11 ratings

Price and stock live with the storefront and can move between visits.

Hydraulic Copper and PEX Crimping Kit

What this one is built to do

Hydraulic press body

Pumping the handle builds steady pressure through the cylinder without needing broad leverage. The jaws close evenly on copper fittings and plastic sleeves until the crimp seats flat.

Rotating slim jaw

The head turns freely so you can align the dies around a pipe run against a wall. Its narrow profile clears cabinet framing where wide handles would bind.

Prep tools included

Clean joints start with square cuts and clean rims. We pack a pipe cutter and a deburring tool right in the case beside the main press body.

Swappable die sets

The dies swap in and out of the jaws to match different pipe diameters. You carry one hydraulic frame instead of a stack of dedicated crimping pliers.

The spec line

Tool shelfDrivers, jigs and install kits
Where it worksAround the house, At the workbench

Payment, delivery and returns run at the storefront, under its own rules.

Hydraulic Copper and PEX Crimping Kit

A manual hydraulic crimper with swappable dies for copper and PEX lines, sized to swing under a sink and squeeze fittings closed.

$149.994.4 out of 5 11 ratings