Skip to the gear
Drivers, jigs and install kits

Circuit Breaker Finder with Outlet Tester

Tracing a wall outlet back through an unlabeled panel usually means walking stairs and flipping switches blind. We pack the transmitter, the wand, and socket adapters into one small case so you can find the right switch alone. The tester reads wiring faults and holds the screen readout when pulled.

$65.994.6 out of 5 12 ratings

Price and stock live with the storefront and can move between visits.

Circuit Breaker Finder with Outlet Tester

What this one is built to do

Finding the panel switch

Plug the sender into the wall box and run the wand down your panel rows. The receiver beeps over the switch feeding that run so you do not flip breakers at random.

Reading socket wiring

Push the tester into an outlet to check ground, hot, and neutral paths on the backlit screen. An integrated button trips test buttons on ground-fault receptacles to check their response.

Holding your numbers

The readout holds voltage and frequency data after you pull the plug from behind a bench. Take the tool into good light to read the figures instead of crouching on the floor.

Adapters in the case

Bare terminals and bare light fixtures take different ends than standard wall plugs. The case holds the lead clips and the screw-in socket adapter beside the receiver and sender.

The spec line

Tool shelfDrivers, jigs and install kits
Where it worksAround the house, At the workbench
Battery250V
Size3 in
Functions3-in-1

Payment, delivery and returns run at the storefront, under its own rules.

Circuit Breaker Finder with Outlet Tester

Map circuits back to the panel and check outlet wiring with one handheld set that keeps readings on screen after you pull it.

$65.994.6 out of 5 12 ratings