SAKER
38-Piece Magnetic Nut Driver Set
A full tray of chrome-vanadium magnetic sockets, deep wells, and adapters built to grab fast and stay locked on the bolt head.
$56.99
4-in-1 Router Milling Jig with Punch Guide
Setting up a compass or clamping straight boards takes up half the morning before the bit touches timber. We machined this guide from aluminum alloy so a compact router drops straight onto the plate. It runs circles around a center pin and locks along fences for clean grooves.
$29.99
Price and stock live with our retail partner and can move between visits.
What this one is built to do
Machined base plate
We cast and mill the plate from aluminum alloy so it sits flat without flexing under your hands. It mounts directly under a small palm router, keeping the cutter plumb while you track along marked stock.
Detachable pivot arm
The center pin arm drops in when you need to swing a circle or cut out a round insert. Pull the pin, and the remaining shoe runs straight down a board edge for standard slot work.
Dual marked scales
One side carries standard measurements and the other reads in metric increments. The marks are stamped right into the metal so pencil dust and sawdust wipe off without scrubbing the lines away over time.
Handles varied stock
The broad underside rides flat across solid timber, medium-density board, and rough plywood without tipping over the cut edge. You supply the palm router and the bit; the shoe tracks the path you set.
The spec line
| Tool shelf | Drivers, jigs and install kits |
|---|---|
| Where it works | At the workbench |
| Size | 4 in |
| Functions | 4-in-1 |
The storefront belongs to our retail partner. Payment, delivery and returns run on their side, under their rules.
Others on the drivers, jigs and install kits shelf
Six-Piece Hammer Set
Six distinct striking tools cover everything from framing a shed corner to seating soft pine joints without leaving a dent.
$49.99
65-Piece Laminate Flooring Installation Kit
The mallet, pull bar, handled block, spacers and locking gauge you need to lay laminate plank tight to the wall.
$42.29
Cordless Tile Vibration Tool
A cordless tiler tool with suction grip and adjustable vibration speed to seat large floor or wall tile flat in the mortar bed.
$37.37
4-in-1 Router Milling Jig with Punch Guide
Circles and straight mortises need clean pivots, so we built this aluminum base to guide your palm router through sheet goods and hardwood boards.
$29.99